I went to furniture stores in my city and was upset by the prices. The chair is delivered in a cardboard box of impressive dimensions
The gas lift adjustment has a flat ribbed handle
Despite its considerable weight, almost 15 kg, the box does not have carrying handles But strong and solid, as their second task, in addition to supporting the arms, is also to create the frame of the chair There is no such thing here, it rolls like clockwork There is only one conclusion – it is necessary to change the computer chair. Swing can be turned off by pushing the gas lift handle inward. Dense and with the invoice imitating natural skin. In order for the chair to swing back, the handle should be under the right hand of the person sitting The manufacturer positions it as a class C executive chair Is it so? Time will tell.
Minimum gas lift height (from floor to bottom edge seat) 39 cm The seat is moderately soft, the butt does not fail, but it does not stiffen after a long work. There is flash in the hole for the gas lift on the crosspiece
If the numbers tell someone about something, I quote
Next, we insert the gas lift into the mounting hole of the cross .
The backrest with the seat, as well as accessories are packed in plastic bags

I am satisfied with the chair.
Manufactured by Fabrikant company, Ryazan region, Polyany village. Usually with such wheels, the problem is to drive off or drive up to the table.
There are also complaints about the quality of plastic elements. I checked the chairs chosen in terms of convenience on the Internet and found an affordable option.
Surprisingly, the chair rolls very easily.
Let's start assembling. For my height of 178 cm, the head fits exactly on it, and the bend goes just along the neck.
After all the screws have found their
place, the chair takes on the necessary form.
The armrests are simple , plastic. I was afraid that leatherette would make my ass sweat, but no – now I'm writing a review in 30-degree heat and I feel fine. It would seem a trifle, but the view spoils. Some kind of translucent cloth, nailed around the perimeter with staples.
But this operation does not take much time
Next is the most time-consuming step. We bait the screws again and only then tighten them tightly. The chair, of course, is delivered disassembled This means that he is also proud of his products, and is confident in their quality.
The gas lift is ordinary, in appearance, like in other chairs Recently, I've been noticing that my back has started hurting while working at my home computer.
Well, that's all, we connect the seat with the gas lift and the chair is assembled
It is pleasing that in the countryside, and even in the neighboring Ryazan region, furniture production remains.
The same mention is on the armrests. But this is sad.
Back height 69 cm Nevertheless, he sat in the chairs he liked, twisted, swayed, fidgeted – in general, he carried out a full test drive. What's the point then? I did not notice much difference in swing with this adjustment. The chair under me does not crack, does not creak and does not stagger.
But that's exactly what I wanted, because I roll right under the keyboard shelf and constantly strike at the bottom edge of the shelf at the place of their contact. We unscrew the screws from the back and side of the seat. At work, he has already worn holes under the same wheels There is still a margin of safety.
A metal tag with the brand name is sewn on the side of the back. My back no longer hurts after working at my home computer. The leather is artificial, but of quite high quality. They became a chair made of leatherette with a rocking mechanism Atlant PL. The box is sealed with hefty staples that don't look like copper. Our, equally rural, Tulinovo furniture factory was demolished, a sign for the sale of land has recently appeared on its fence.
-degree heat in search of the necessary hardware. Tambov vodka with a wolf has long been gone, and soon we will be left without our furniture. We bait the screws at all attachment points, but do not tighten until the end Unlike upholstered furniture, here the sellers did not express any negative. This is a good sign when a manufacturer is proud of his name and tries to emphasize it.
But again, this is all secondary and will not be visible in the end. I haven't seen this at work.
For some reason, on the store page it is indicated that the upholstery material is genuine leather. You need to assemble the seat frame. Hands are also in place on the armrests. This will interfere with the assembly and in the future the edges will be frayed.
The maximum tilt angle when swinging is quite large – about 45⁰
The headrest is also very comfortable. It is located exactly where you need it.
Well, the last stage of installation, installation of the rocking mechanism.
Kit for self-assembly of the chair
consists of a soft back with a seat, a cross with wheels (5 pcs.), a gas lift with a cover, a seat fastening mechanism and two armrests
These staples pierced through the assembly instructions https://jiji.ug/part-time-and-weekend-jobs. The instruction says that you need to start with the installation of the wheels
The mechanism for fastening the seat and swinging the chair is massive, made of thick, well-painted steel I don’t think that rubberized ones would greatly increase the cost of the chair, but the laminate would say a big thank you.
Maximum gas lift height (from the floor to the lower edge of the seat) 51 cm
The manufacturer did not provide any plugs for the screws. A soft leather or fabric armrest will not withstand such treatment for a long time. The second cylindrical handle regulates the swing force. We'll have to buy them in MebelSam Seat depth 45 cm What did I like about this chair? First, it is very comfortable for me to sit in it. My weight is 95 kg.
Seat/back width 51 cm However, having unpacked the package with the seat, I calmed down – the screws were already screwed into their seats.

Armchair Atlant PL from the company "Fabrikant", Ryazan

A zipper is sewn in the center of the back on the back, but the lock is nowhere to be seen. The manufacturer has set a maximum load of 120 kg. It enters effortlessly.
As they say warm and dry.
And on the cover of the gas lift itself I can safely recommend The back is supported by a tight lumbar support.
The back of the seat did not impress at all. It is not true. Of course, this disgrace in the assembled form will not be visible, but how much did the manufacturer win with this decision?
Unfortunately, the holes are not processed in any way.
The chair looks presentable and solid. The wheels are small plastic.
They are inserted rather tightly